Renesas RJJ10J1643-0101 - Manual (Page 44)

Rev.1.01 2007.02.16
RJJ10J1643-0101 42
__SetSerialInterrupt
Synopsis
Boolean __SetSerialInterrupt(unsigned long data)
data Setup data
Description Sets serial interrupts according to specified parameters.
[data]
For data, the following values can be set.
(M16C)
RAPI_COM1 UART0 RAPI_COM2 UART1
RAPI_COM3 UART2 RAPI_COM4 SI/O3
RAPI_COM5 SI/O4
For interrupt settings, the following values can set.
(M16C) (UART0, UART1, UART2)
RAPI_INT_TX_DIS Transmit interrupt disabled
RAPI_INT_TX_LV_1 Transmit interrupt priority level 1
RAPI_INT_TX_LV_2 Transmit interrupt priority level 2
RAPI_INT_TX_LV_3 Transmit interrupt priority level 3
RAPI_INT_TX_LV_4 Transmit interrupt priority level 4
RAPI_INT_TX_LV_5 Transmit interrupt priority level 5
RAPI_INT_TX_LV_6 Transmit interrupt priority level 6
RAPI_INT_TX_LV_7 Transmit interrupt priority level 7
RAPI_INT_RX_DIS Receive interrupt disabled
RAPI_INT_RX_LV_1 Receive interrupt priority level 1
RAPI_INT_RX_LV_2 Receive interrupt priority level 2
RAPI_INT_RX_LV_3 Receive interrupt priority level 3
RAPI_INT_RX_LV_4 Receive interrupt priority level 4
RAPI_INT_RX_LV_5 Receive interrupt priority level 5
RAPI_INT_RX_LV_6 Receive interrupt priority level 6
RAPI_INT_RX_LV_7 Receive interrupt priority level 7
(M16C) (SI/O3, SI/O4)
RAPI_INT_SIO_DIS SI/O interrupt disabled
RAPI_INT_SIO_LV_1 SI/O interrupt priority level 1
RAPI_INT_SIO_LV_2 SI/O interrupt priority level 2
RAPI_INT_SIO_LV_3 SI/O interrupt priority level 3
RAPI_INT_SIO_LV_4 SI/O interrupt priority level 4
RAPI_INT_SIO_LV_5 SI/O interrupt priority level 5
RAPI_INT_SIO_LV_6 SI/O interrupt priority level 6
RAPI_INT_SIO_LV_7 SI/O interrupt priority level 7
(R8C)