Renesas RJJ10J1643-0101 - Manual (Page 4)

Rev.1.01 2007.02.16
RJJ10J1643-0101 2
REVISION HISTORY
Rev.
Summary Date
1.00 06.04.07
1.01 ・ Additions and corrections made for support of libraries for the H8/36094, H8/36077,
H8/36109, and R8C/24 and 25
・ Unnecessary periods in Chapter 1, “Instruction,” deleted
・ Port P73 of H8 deleted
・ Channels A–D written in CreateInputCapture corrected to input captures A–D
・ Error in writing “seroal” corrected to “serial”
・ Erroneous description of RAPI_70_STATES corrected
・ Error in writing of timer channel names corrected
・ Error in writing of input capture mode corrected
・ Error in writing of output compare mode corrected
・ Erroneous description of RAPI_OVERFLOW_BIT15 corrected
・ Support for R8C UART1 clock synchronous mode
・ RAPI_COUNT_CLEAR added to first arguments for the R8C and H8/300H in
__CreateInputCapture and __CreateOutputCompare
・ “External signal” deleted from the timer RD count source for the R8C in
__CreateInputCapture and __CreateOutputCompare
・ Following statements added to the item for timer RD in __SetTimerRegister and
__GetTimerRegister
・ [15]: Timer RD output master enable register 1
・ [16]: Timer RD output master enable register 2
・ [17]: Timer RD output control register
・ Explanation for clearing H8/300H module added to the description of __Create...,
__Open..., and __BasicOpen...
・ Explanation for setting H8/300H module for standby added to the description of
__Destroy..., __Close..., and BasicClose...
・ Return value in __PollingSerialReceiving changed from Boolean to unsigned int, and
explanation of return value and example program changed
・ Return value in __PollingSerialSending changed from Boolean to unsigned int, and
explanation of return value and example program changed
・ Remarks regarding use of port B on H8/300H added to __ReadIOPort and
__ReadIOPortRegister
07.02.16