Renesas RJJ10J1643-0101 - Manual (Page 180)

Rev.1.01 2007.02.16
RJJ10J1643-0101 178
__GetInterruptFlag
Synopsis
Boolean __GetInterruptFlag(unsigned long data1, unsigned int *data2))
data1 Setup data 1 (content differs with MCU type)
data2 Pointer to the buffer in which the acquired flag data is stored
Description Gets the value of interrupt request flag of a specified external interrupt.
[data1]
(M16C)
RAPI_INT0 Uses _INT0 interrupt.
RAPI_INT1 Uses _INT1 interrupt.
RAPI_INT2 Uses _INT2 interrupt.
RAPI_INT3 Uses _INT3 interrupt.
RAPI_INT4 Uses _INT4 interrupt.
RAPI_INT5 Uses _INT5 interrupt.
RAPI_KEY Uses key input interrupt.
(R8C)
RAPI_INT0 Uses _INT0 interrupt.
RAPI_INT1 Uses _INT1 interrupt.
RAPI_INT2 Uses _INT2 interrupt.
RAPI_INT3 Uses _INT3 interrupt.
RAPI_KEY Uses key input interrupt.
(H8/300H)
RAPI_IRQ0 Uses IRQ0 interrupt.
RAPI_IRQ1 Uses IRQ1 interrupt.
RAPI_IRQ2 Uses IRQ2 interrupt.
RAPI_IRQ3 Uses IRQ3 interrupt.
RAPI_WKP0 Uses WKP0 interrupt.
RAPI_WKP1 Uses WKP1 interrupt.
RAPI_WKP2 Uses WKP2 interrupt.
RAPI_WKP3 Uses WKP3 interrupt.
RAPI_WKP4 Uses WKP4 interrupt.
RAPI_WKP5 Uses WKP5 interrupt.
[data2]
Value of interrupt request flag (0: Interrupt not requested; 1: Interrupt requested)
Return value If the external interrupt specification is incorrect, RAPI_FALSE is returned; otherwise,
RAPI_TRUE is returned.
0 0 0 0 0 0 0