Renesas RJJ10J1643-0101 - Manual (Page 149)

Rev.1.01 2007.02.16
RJJ10J1643-0101 147
__GetTimerRegister
Synopsis
Boolean __GetTimerRegister(unsigned long data1, unsigned int *data2)
data1 Setup data (content differs with MCU type)
data2 Pointer to the buffer in which register value is stored
Description Gets the counter value of a specified timer.
[data]
For data, the following definition values can be set.
(M16C)
RAPI_TIMER_A0 Selects timer A channel 0.
RAPI_TIMER_A1 Selects timer A channel 1.
RAPI_TIMER_A2 Selects timer A channel 2.
RAPI_TIMER_A3 Selects timer A channel 3.
RAPI_TIMER_A4 Selects timer A channel 4.
RAPI_TIMER_B0 Selects timer B channel 0.
RAPI_TIMER_B1 Selects timer B channel 1.
RAPI_TIMER_B2 Selects timer B channel 2.
RAPI_TIMER_S Selects timer S.
(R8C)
RAPI_TIMER_C Selects timer C.
RAPI_TIMER_X Selects timer X.
RAPI_TIMER_Y Selects timer Y.
RAPI_TIMER_Z Selects timer Z.
RAPI_TIMER_RA Selects timer RA.
RAPI_TIMER_RB Selects timer RB.
RAPI_TIMER_RD0 Selects timer RD channel 0.
RAPI_TIMER_RD1 Selects timer RD channel 1.
RAPI_TIMER_RE Selects timer RE.
(H8/300H)
RAPI_TIMER_A Selects timer A.
RAPI_TIMER_B1 Selects timer B1.
RAPI_TIMER_V Selects timer V.
RAPI_TIMER_W Selects timer W.
RAPI_TIMER_Z0 Selects timer Z channel 0.
RAPI_TIMER_Z1 Selects timer Z channel 1.
RAPI_TIMER_RC Selects timer RC.
RAPI_TIMER_RD0 Selects timer RD channel 0.
RAPI_TIMER_RD1 Selects timer RD channel 1.
RAPI_TIMER_RD2 Selects timer RD channel 2.
RAPI_TIMER_RD3 Selects timer RD channel 3.