Renesas RJJ10J1643-0101 - Manual (Page 141)

Rev.1.01 2007.02.16
RJJ10J1643-0101 139
[27]: Specify the set value for waveform generation register 4.
[28]: Specify the set value for waveform generation register 5.
[29]: Specify the set value for waveform generation register 6.
[30]: Specify the set value for waveform generation register 7.
[31]: Specify the set value for the facility select register.
[32]: Specify the set value for the facility enable register.
[33]: Specify the set value for the interrupt request register.
[34]: Specify the set value for interrupt enable register 0.
[35]: Specify the set value for interrupt enable register 1.
(R8C)
• When using timer C (RAPI_TIMER_C specified)
[0]: Specify the set value for the timer C output control register.
[1]: Specify the set value for timer C control register 0.
[2]: Specify the set value for timer C control register 1.
[3]: Specify the set value for the capture & compare 0 register.
[4]: Specify the set value for the compare 1 register.
• When using timer X (RAPI_TIMER_X specified)
[0]: Specify the set value for the timer count source setup register.
[1]: Specify the set value for the prescaler X register.
[2]: Specify the set value for the timer X register.
[3]: Specify the set value for the timer X mode register.
• When using timer Y (RAPI_TIMER_Y specified)
[0]: Specify the set value for the timer count source setup register.
[1]: Specify the set value for the prescaler Y register.
[2]: Specify the set value for the timer Y primary register.
[3]: Specify the set value for the timer Y secondary register.
[4]: Specify the set value for the timer Y & Z waveform output control register.
[5]: Specify the set value for the timer Y & Z output control register.
[6]: Specify the set value for the timer Y & Z mode register.
• When using timer Z (RAPI_TIMER_Z specified)
[0]: Specify the set value for the timer count source setup register.
[1]: Specify the set value for the prescaler Z register.
[2]: Specify the set value for the timer Z primary register.
[3]: Specify the set value for the timer Z secondary register.
[4]: Specify the set value for the timer Y & Z waveform output control register.
[5]: Specify the set value for the timer Y & Z output control register.
[6]: Specify the set value for the timer Y & Z mode register.
• When using timer RA (RAPI_TIMER_RA specified)
[0]: Specify the set value for the timer RA I/O control register.
[1]: Specify the set value for the timer RA prescaler register.
[2]: Specify the set value for the timer RA register.
[3]: Specify the set value for the timer RA mode register.
[4]: Specify the set value for the timer RA control register.
• When using timer RB (RAPI_TIMER_RB specified)
[0]: Specify the set value for the timer RB one shot control register.