Renesas RJJ10J1643-0101 - Manual (Page 28)

Rev.1.01 2007.02.16
RJJ10J1643-0101 26
(R8C) (UART0, UART1)
RAPI_SM_SYNC Clock synchronous serial communication mode
RAPI_SM_ASYNC Clock asynchronous serial communication mode
For the data length format of clock asynchronous serial communication, the following
values can be set.
If the API is used in clock synchronous serial communication mode, do not set these
values.
(R8C) (UART0, UART1)
RAPI_BIT_7 Transfer data length 7 bits RAPI_BIT_8 Transfer data length 8 bits
RAPI_BIT_9 Transfer data length 9 bits
For the clock source of serial communication, the following values can be set.
(R8C) (UART0, UART1)
RAPI_CKDIR_INT Internal clock is used as the clock source of serial communication.
RAPI_CKDIR_EXT External clock is used as the clock source of serial communication.
For the stop bit length of clock asynchronous serial communication, the following
values can be set.
If the API is used in clock synchronous serial communication mode, do not set these
values.
(R8C) (UART0, UART1)
RAPI_STPB_1 1 stop bit RAPI_STPB_2 2 stop bits
For the parity bit of clock asynchronous serial communication, the following values can
be set.
If the API is used in clock synchronous serial communication mode, do not set these
values.
(R8C) (UART0, UART1)
RAPI_PARITY_NON No parity bit RAPI_PARITY_EVEN Even parity bit
RAPI_PARITY_ODD Odd parity bit
For the clock polarity of serial communication, the following values can be set.
If the API is used in clock asynchronous serial communication mode, do not set these
values.
(R8C) (UART0, UART1)
RAPI_DPOL_NON Polarity not inverted RAPI_DPOL_INV Polarity inverted
For the count source of the built-in baud rate generator, the following values can be set.
(R8C) (UART0, UART1)
RAPI_BCSS_F1 f1SIO RAPI_BCSS_F8 f8SIO
RAPI_BCSS_F32 f32SIO
For the transfer format, the following values can be set.
If the data length selected for use in clock asynchronous serial communication mode is
7 or 9 bits long, do not set these values.
(R8C) (UART0, UART1)
RAPI_LSB_SEL LSB first RAPI_MSB_SEL MSB first
(H8/300H)
RAPI_COM1 SCI3 channel 1 RAPI_COM2 SCI3 channel 2