Printronix Network Interface Card - Manual (Page 66)

Chapter 3 Print Path Configuration
66
Selected Model
Defines the model configuration that is to be associated with the
current destination. The default model names are m1, m2, m3, m4,
m5, m6, m7, and m8.
Current Model Settings
Figure 8. Print Path Configuration, Current Model Settings
Model Type
The option is available on the Print Model web page. For a
description, see page 68.
Banner Page
The option is available on the Print Model web page. For a
description, see page 69.
Filter
The option is available on the Print Model web page. For a
description, see page 69.