Printronix Network Interface Card User Manual
Page 353
Printer Logging Through Logpaths
353
7.
Using Windows Explorer, navigate to the appropriate file on the
CD (using the Unzipped directory) based on the printer type,
and desired emulation, e.g., Unzipped
T5000
IGP.
IMPORTANT
You must use the Unzipped directory, since this contains the
uncompressed files necessary for NIC download.
8.
Make note of the file name, which is a six digit number plus
.prg, e.g., 123456.prg.
This is the file you will download into the NIC.
9.
Copy the file to the download directory.
10. Start a command prompt session. (The Start Menu icon is
usually labeled
MS-DOS Prompt or Command Prompt.)
11. At the command prompt type:
C:
cd \download
12. Start the FTP protocol by typing:
ftp xxx.xxx.xxx.xxx
(where
xxx.xxx.xxx.xxx represents the IP Address of the
printer.)
13. Log in to the printer by typing:
root
You are given a password prompt.
NOTE: The default is no password. If the FTP program requires a
password, contact your system administrator.
14. At the password prompt, press
15. Once logged in, type the following sequence at the command
prompt to download the
filename.prg file to the printer:
cd dest
cd d1prn
bin
put filename.prg
(where
filename.prg is the file name you noted in step 8.)
Downloading Software Through The Network Interface Card (NIC)