Printronix Network Interface Card - Manual (Page 240)

Chapter 10 Verify Printing On AS/400
240
Troubleshooting
This installation procedure assumes that the NIC adapter is
configured with the correct IP address, subnet mask, and gateway
(if required). In addition you can also ping and telnet to the NIC
adapter.
Print an E-net Test Page to verify the Ethernet settings.
(P5000, T5000e/SL5000e, T4000) DIAGNOSTICS Printer
Tests E-Net Test Page Enter.
(P7000, T5000r/SL5000r) DIAGNOSTICS Printer Tests
Ethernet Test Enter.
(L55xx, L1524) DIAGNOSTICS Test Pattern E-Net Test
Page Enter.
The default NIC queue name is d1prn, however, the name can be
changed. Substitute the changed name for the RMTPRTQ
parameter. To verify the queue name, print an E-Net Test Page or
telnet to the adapter and perform a “list dest” command.
Internet address (INTNETADR)
Specify the IP address of the printer.
Verify Printing On AS/400
This section verifies that the printer is capable of printing ASCII files
and that the printer can be pinged on the network.
To test ASCII printing:
1. Start TCP/IP, if it is not already running, by entering the
command STRTCP.
2. Verify that the AS/400 TCP/IP interface is active.