Printronix Network Interface Card - Manual (Page 305)

305
15
Commands
Command Shell Overview
The NIC comes with an in-depth command shell called npsh. It
allows you to manipulate objects like destinations, I/O ports, and
models and provides monitoring and troubleshooting capabilities.
npsh Access Methods
There are many ways this command shell can be accessed:
• built in HTML forms
• a Telnet session from a TCP/IP host to the NIC
• a single remote shell command (e.g., rsh, rcmd, remsh) from
a TCP/IP host
Main npsh Command Prefixes
All configurable commands either start with store or set, and
view commands start with list.
NOTE: If the store prefix is used, the NIC must be repowered to
make the changes take effect. Since store affects flash
memory settings only, the print server must reset and read
the new settings now in flash memory.