Printronix Network Interface Card - Manual (Page 342)

Chapter 15 Complete Command List
342
tn dest destination start|stop
Example: tn dest d1prn start
Set the tn autoconnect flag temporarily, to enable (start) or
disable (stop). See “store tn dest destination
[-]autoconnect” command for further definition.
chr
Echo < string> or redirect to an I/O port using the
chr ioport .
keycode
Determine the hexadecimal value for a key to be used as the
escape character with the NIC built-in telnet command.
? (Help)
Lists all available commands.