Printronix Network Interface Card - Manual (Page 176)

Chapter 7 Novell NIC Configuration (10/100Base-T)
176
Print Server Setup - HTML Method
1. Load a Web browser on a network station that can
communicate with the print server over TCP/IP.
2. Direct your Web browser to URL:
http://NICIPaddress/networkConf.html
(e.g., http://192.75.11.9/networkConf.html).
NOTE: If prompted for a User ID and password, type in root for
the ID and press ENTER at the password prompt (since
there is no password by default).
3. Look under the Novell section and add the new password to the
Pserver Password field.
NOTE: The passwords entered in Netware Administrator or
PCONSOLE must match the password set on the unit.
4. Click SUBMIT when done and physically repower the printer to
make the new settings take effect.
Print Server Setup - Manual (Telnet) Method
1. Telnet to the print server:
telnet ipaddress
NOTE: If prompted for a User ID and password, type in root for
the ID and press ENTER at the password prompt since
there is no password by default.
2. You should see a prompt with the NIC IP address:
ipaddress:root>
3. At the prompt, enter:
store pserver novell passwd password
NOTE: The passwords entered in Netware Administrator or
PCONSOLE must match the password set on the unit.
4. Reset the unit to ensure the changes take effect:
reset