Printronix Network Interface Card - Manual (Page 312)

Chapter 15 Complete Command List
312
WLAN
ADAPTER,
WLAN
Configures the KDC port:
store kerberos config kport
is the 2-byte UPD/TCP port used for Kerberos
communication. Default is 88.
WLAN
ADAPTER,
WLAN
Configures the KDC name portion of the service principal:
store kerberos config kname
has a maximum of 127 characters excluding
“:” and “/”. Default is krbtgt.
WLAN
ADAPTER,
WLAN
Configures the KDC realm portion:
store kerberos config krealm
is usually set to the uppercase name of the
Windows 2000 KDC to which the Access Point is configured.
has 0 to 127 characters excluding “:” and “/”.
Default is localrealm.
WLAN
ADAPTER,
WLAN
Sets the Kerberos password that must match the Windows 2000
user password for the Print Server:
store kerberos password
is either a string without any space and
tab, or a double quoted string with a maximum of 40 alpha-
numeric characters or symbols. The administrator should
choose at least 9 alphanumeric characters with a combination
of upper and lower case characters and symbols. In the
Windows environment, this is the Windows 2000 user
password for the Print Server and they must be exactly the
same.
store pping opts [-]enable
Example: store pping opts enable
Store the state of periodic ping flag. If the periodic ping flag is
enabled the NIC periodic ping client will attempt to ping its
default gateway on its active NIC interfaces.
Default: disabled