Printronix Network Interface Card - Manual (Page 323)

Set Commands
323
set dest service [[-]socket][[-]lpd]
[[-]lpsched] [[-]rprinter] [[-]pserver] [[-]netbios]
[[-]ftpd] [[-]tn]
Example: set dest d1prn service -netbios
Set the destination () to handle only certain print
services. To add a service, specify the service name. To
disable a service, use “
- ” before the name. The available
services are described in the following table.
set dest from default
Set all destination settings back to factory defaults.
set dest from stored
Set all current destination settings to the values stored in flash
memory.
Services
socket Direct socket printing via TCP/IP.
lpd LPR printing with TCP/IP, including LPR clients
on any platform.
lpsched LP or System V printing with TCP/IP.
ADAPTER,
WLAN
ADAPTER
rprinter Novell RPRINTER support.
ADAPTER,
WLAN
ADAPTER
pserver Novell PSERVER support.
netbios Windows 95 and Windows for Workgroups
printing.
ftpd Printing using the File Transfer Protocol (FTP)
via TCP/IP.
tn Printing using the TN5250/3270 session.