Printronix Network Interface Card - Manual (Page 115)

Windows NT 3.51 Host Setup
115
6. Select LPR Port from the list that displays, and click OK to
bring up a dialogue box similar to the one in Figure 23.
Figure 23. Add LPR Compatible Printer Dialogue Box
7. Type in the IP address or host name of the NIC in the first field.
8. Type in the name of a predefined destination/queue on the NIC
in the second field.
NOTE: This name must be a name of an existing destination/
queue on the NIC, and it must be lowercase by default.
You will probably use d1prn.
9. Click OK when you have specified these two fields.
You now have a new network printer which relies on the standard
TCP/IP print protocol, LPD, to print remotely to a printer with the
NIC.