Sco setup – Printronix Network Interface Card User Manual
Page 136
Chapter 5
SCO Setup
136
The default NIC queue name is d1prn, however, the name can be
changed. To verify the queue name, print an E-Net Test Page or
telnet to the adapter and run a “list dest” command.
NOTE: Depending on the shell, preceed the ! character with a \ to
avoid shell script errors.
SCO Setup
1.
Login as a root or administrator privileges user.
2.
Acquire an unused Internet address (IP) from your Network
Administrator and choose a unique name for the NIC adapter.
3.
Add your NIC Internet address and host name to your system
host table by appending the following line to the /etc/hosts file:
Example:
199.230.23.76
salesdept
4.
If you have not installed the SCO RLP (BSD lpd) package
which is part of the TCP/IP package, run mkdev to invoke the
RLP installation script:
#mkdev rip
The following screen displays:
Remote printing configuration
Do you want to install or delete remote printing (i/d/q)?