Procedure b – Printronix Network Interface Card User Manual
Page 346
Chapter 16
NIC Security
346
8.
Wait about 1 minute for the adapter to reboot after the reset
command.
9.
Turn the printer off, wait 15 seconds, and turn the printer back
on. Wait 1 minute for the adapter to boot.
10. Telnet back into the adapter, logging in as root with no
password, and pressing Enter.
Procedure B
1.
Turn the printer off.
2.
Flip dip switch 2 down on the NIC adapter.
3.
Turn the printer on, and wait about 1 minute for the adapter to
boot.
4.
Telenet to the adapter.
5.
Login as root and press Enter for the password.
6.
Flip dip switch 2 up.
7.
Type the following at the telnet prompt:
set user passwd root
save
reset
8.
Wait about 1 minute for the adapter to reboot after the reset
command.
9.
Turn the printer off, wait 15 seconds, and turn the printer back
on. Wait 1 minute for the adapter to boot.
10. Telnet back into the adapter, logging in as root with no
password, and pressing Enter.