Directly, Restarting the smartstor – Promise Technology SMARTSTOR NS4300N User Manual
Page 109
Chapter 5: SmartNAVI
99
2.
Click the NAS Management icon.
3.
Click the Shutdown button.
4.
Click the Shutdown option.
5.
Click the OK button.
6.
In the confirmation box, click the Close button.
Directly
To shut down the SmartStor, press and hold the power
button for five seconds. The system status LED turns red,
then goes dark (right).
Restarting the SmartStor
To restart the SmartStor after a shutdown, press the power
button on the front of the SmartStor chassis (right).
When the SmartStor is fully booted:
•
The system status LED turns green (right)
•
The buzzer beeps one time (if the buzzer is enabled)
See “Enabling and Disabling the Buzzer” on page 144.
Power
Button
System
Status
LED
Power
Button
System
Status
LED