Enabling and disabling plug-ins, Enabling plug-ins, Disabling plug-ins – Promise Technology SMARTSTOR NS4300N User Manual
Page 107: Removing plug-ins, Enabling and disabling plug-ins removing plug-ins
Chapter 5: SmartNAVI
97
Enabling and Disabling Plug-ins
Enabling Plug-ins
You must add a plug-in to SmartStor before you can use this function.
To enable a plug-in:
1.
Go to the Main Window.
2.
Click the NAS Management icon.
3.
Click the Configuration Plugin button.
4.
Click the Plug-in you want to enable.
The plug-in's name turns red.
5.
Click the Enable button.
After a moment, the Service Status changes to ON.
The plug-in is now enabled on SmartStor
Disabling Plug-ins
Disabling a plug-in saves memory space and processing time on the SmartStor.
If you do not use a feature, consider disabling its plug-in.
To disable a plug-in:
1.
Go to the Main Window.
2.
Click the NAS Management icon.
3.
Click the Configuration Plugin button.
4.
Click the Plug-in you want to disable.
The plug-in's name turns red.
5.
Click the Disable button.
After a moment, the Service Status changes to OFF.
The plug-in is now disabled.
Removing Plug-ins
There are two reasons to remove a plug-in:
•
To replace the old plug-in with a new one
•
You know that you will never use the plug-in
Before you remove a plug-in, consider disabling it, instead. See “Enabling and
Disabling Plug-ins” on page 97.
To remove a plug-in:
1.
Go to the Main Window.
2.
Click the NAS Management icon.