Paradyne BitStorm IP DSLAM 1900 - Manual (Page 64)

2. BitStorm 1900 Installation and Testing
2-48 BitStorm 1900 Installation and Maintenance Guide 1900-A2-GN20-00
Task 005: Installing the Circuit Packs
Use this procedure to install the BitStorm 1900 circuit packs.
Requirements
This procedure requires the following:
• Grounded anti-static protection
Step Procedure
1.) Place anti-static strip on wrist and attach to the grounded rack.
2.) Remove the circuit pack from the anti-static packaging.
3.) Align the card in the appropriate slot.
4.) Seat the card by pressing firmly into place.
STOP
WARNING: ESD (ELECTROSTATIC DISCHARGE) ! Anti-
static protection required! When handling
any circuit pack, you must wear grounded
anti-static protection. The discharge of static
electricity can damage the circuit packs.