Paradyne BitStorm IP DSLAM 1900 - Manual (Page 127)

Appendix A. Installation Requirements
1900-A2-GN20-00 BitStorm 1900 Installation and Maintenance Guide A-111
Network Support Equipment
The network support equipment that may need to be installed includes
the following:
• Ethernet 10 Base-T hub port for BitStorm 1900 Hub card
connection (one per BitStorm 1900 shelf)
• Ethernet 10 Base-T hub ports for StormTracker/InterProxy (two per
StormTracker)
• LAN router connections
• WAN gateway connection
Network support requirements will vary according to the existing
facility resources. We suggest using a site survey questionaire to ensure
all requirements are identified. Paradyne Partners will find surveys on
our Partners site at www.paradyne.com.
BS1900 Component Installation Requirements
Table A-2, "BitStorm 1900 Components" lists the component
requirements for the BitStorm 1900.
Table A-2: BitStorm 1900 Components
Part# BitStorm Component Rules/Capacity
01-00039-10 BitStorm 1900 Shelf
(empty) 10 CO Modem Cards
1 Power Card
1 MIU Card
06-00010-01 Blank Filler Card 1 included; 1 per empty modem slot
Required w/Fan Tray
01-00080-01 DC, 260W Power Card Powers 10306 w/MIU
01-00079-01 AC, 260W Power Card Powers 10306 w/MIU
01-00075-01 MIU Card w/Cable 1 per shelf
01-00153-01 10306 CO Modem Card 6 Dedicated 10 Mbps EtherLoop Lines,
01-00164-01 10224 CO Modem Card 24 EtherLoop Lines:
10 Mbps 24 Stat-Mux;
12 ports per 10 Mbps modem
01-20029-01 Filter Shelf, 3RU (empty) 10 filter cards; 120 filters
1 per two BitStorm 1900 w/10306
2 per BitStorm 1900 w/10224