Paradyne BitStorm IP DSLAM 1900 - Manual (Page 120)

3. BitStorm 1900 Maintenance
3-104 BitStorm 1900 Installation and Maintenance Guide 1900-A2-GN20-00
Cable Connections
It is important to ensure that all connections to the EtherLoop system
are firmly seated and secured. An incomplete connection at any one
point could cause the EtherLoop system to malfunction.
BitStorm 1900 Equipment Installation
BitStorm 1900 equipment is relatively simple to install. However, if an
equipment card is installed in the wrong slot, or if the cards are not
firmly seated in their backplane connectors, the EtherLoop system will
not function.
Data Network Equipment Configuration
For an EtherLoop system to function, the data network supporting the
system must be properly configured. For example, IP addresses must
be correct, and the network router must be configured properly.
Equipment Failure
LEDs on the BitStorm 1900 shelf and on the modem indicate if any
equipment failures have occurred in the EtherLoop system.