PIONEERPOS AT Commands G24-LC - Manual (Page 45)

Chapter 1: Product Features
April 15, 2008 G24-L AT Commands Reference Manual 1-15
AT Commands Summary
The following list contains a summary of all the G24-L AT commands sorted by functionality.
Table 1-1: AT Commands
AT Command Description Page
Modem ID
Subscriber Unit Identity
+CGMI This command displays manufacturer identification. Page 3-1
+GMI This command displays manufacturer identification. Page 3-1
+FMI This command displays manufacturer identification. Page 3-1
+CGMM This command displays the model identification. Page 3-2
+GMM This command displays the model identification. Page 3-2
+FMM This command displays the model identification. Page 3-2
+CGMR This command displays the revision identification. Page 3-3
+GMR This command displays the revision identification. Page 3-3
+FMR This command displays the revision identification. Page 3-3
+CGSN This command displays the product serial number identification. Page 3-3
+GSN This command requests the product serial number identification. Page 3-3
+CSCS This command selects the G24-L character set. Page 3-4
+CIMI This command displays the International Mobile Subscriber Identity
number. Page 3-5
+CFSN This command is used to query the manufacturing serial
number
.
Page 3-5
I This command displays various G24-L information items. Page 3-6
+CNUM This command displays up to five strings of text information that
identify the G24-L. Page 3-6
$ This command displays a list of all the AT commands supported by
the G24-L. Page 3-7
+CLAC This command displays a list of all the AT commands supported by
the G24-L. Page 3-8
Call Control
Call Control Commands
D This command places a voice call on the current network, when
issued from an accessory device. Page 3-11
D> This command places a voice/fax/data call on the current network
by dialing directly from the G24-L phone book. Page 3-12