PIONEERPOS AT Commands G24-LC User Manual
Page 51
Chapter 1: Product Features
April 15, 2008
G24-L AT Commands Reference Manual
1-21
+MAMUT
This command controls the muting/unmuting of all input paths
(MIC, HDST_MIC, DIGITAL_RX).
+MAFEAT
This command controls the various algorithm features, such as
sidetone, echo cancel and noise suppress.
General Audio Commands
+MADIGITAL
This command switches between analog and digital audio modes.
+CALM
This command handles the selection of the G24-L’s alert sound
mode.
+MMICG
This command handles the selection of microphone gain values.
+CRTT
This command plays one cycle of a ring tone, stops the cycle in the
middle, and sets the ring tone to be used.
+VTD
This command handles the selection of tone duration.
+VTS
This command transmits a string of DTMF tones when a voice call
is active.
Access
Access Control Commands
A/
This command repeats the last command entered on the terminal.
AT
This command checks the AT communication and only returns OK.
+CPIN
This command is only relevant for phones that use SIM cards. It
unlocks the SIM card when the proper SIM PIN is provided, and
unblocks the SIM card when the proper SIM PUK is provided.
+EPIN
This command is only relevant for phones that use SIM cards. It
verifies the PIN2 indicator.
+TPIN
This command queries the number of remaining SIM PIN/PUK
entering attempts.
+CPWD
This command sets a new password for the facility lock.
+CLCK
This command locks, unlocks or interrogates a G24-L or a network
facility
+EMPC
This command unlocks or resets the first PLMN of the
inserted SIM.
Modem Configuration and Profile
Modem Register Commands
V
This command determines the response format of the data adapter
and the contents of the header and trailer transmitted with the result
codes and information responses.
Q
This command determines whether to output/suppress the result
codes.
Table 1-1: AT Commands (Cont.)
AT Command
Description
Page