PIONEERPOS AT Commands G24-LC - Manual (Page 289)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-225
+CMER, Mobile Equipment Event Reporting
The following table shows the +CMER parameters.
+CLAN, ME Language
This command handles the selection of language in the ME.
Command
Type Syntax Response/Action Remarks
Set +CMER=[
[,[,
[,[,]]]]]
OK
or:
+CME ERROR:
The Set command
enables/disables an external
accessory to receive event
reports from the G24-L. In
some cases, this is used to
track the user activity for
redisplay on a vehicle system,
or to perform accessory-spe-
cific menu operations.
Read +CMER? +CMER:
,,,,
OK
or:
+CME ERROR:
The Read command queries
the current settings for the
AT+CMER command.
Test +CMER=? +CMER: (list of supported
s),(list of supported
s),(list of supported
s),(list of supported
s),(list of supported s)
The Test command returns
the possible ,
, , , and
values.
Table 3-148: +CMER Parameters
Description
Controls the processing of unsolicited result codes specified within this command.
0
Buffer unsolicited result codes in G24-L
Reserved for future implementation.
Reserved for future implementation.
0 No indicator events reporting.
1 Indicator event +CIEV: ,.
shows the indicator order number and is new value of indicator.
The default value is 0.
Controls the effect on buffered codes.
0
Clear buffer.