PIONEERPOS AT Commands G24-LC - Manual (Page 91)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-27
OK
+CCWA: "055728386",129,1,"",0 //Waiting call alerts
AT+CHLD=1 //Release the active call, accept the waiting call
OK
NO CARRIER //Active 9311234567 was released
OK //Waiting 055728386 was answered
+CCFC, Call Forwarding Number and Conditions
This command enables control of the call-forwarding supplementary service. Registration,
erasure, activation, deactivation, and status query are supported.
Command
Type
Syntax Response/Action Remarks
Set +CCFC=,
[,[,[,
[,[,[,e>]]]]]]
If the command succeeds:
+CCFC:
,[,,
[,,[,]]][
+CCFC:
,[,,
[,,[,]]][...]]
+CCFC: (list of supported s)
The Set command
instructs the G24-L
which call
forwarding settings
to request from
network. The Set
command, in query
mode, interrogates
the network about
the subscriber
current call
forwarding status.
Test +CCFC=? +CCFC:
OK
The Test command
returns
values supported
by the G24-L to the
terminal.