PIONEERPOS AT Commands G24-LC - Manual (Page 155)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-91
The +MMGL command does not change the message status. In addition, +MMGL includes a
selection that can be used to query the G24-L for a list of message headers without
attendant message data.
Command Type Syntax Response/Action Remarks
Set +CMGL
[=]
or
+MMGL
[=]
If text mode (+CMGF=1) command execution is
successful and SMS-SUBMITs and/or
SMS-DELIVERs:
+CMGL:
,,,,[]
[,,][<
LF>
+CMGL:
,,,,[]
[,,][...]]
The parameters , refer
command shows the Text Mode Parameters +CSDH
and will be shown according to +CSDH settings.
If text mode (+CMGF=1) command execution is
successful and SMS-COMMANDs:
+CMGL:
,,,[+CMGL:
,,,[...]]
If text mode (+CMGF=1), command execution is
successful and CBM storage:
+CMGL:
,,,,,
[
+CMGL:
,,,,,
[...]]
If text mode (+CMGF=1) command execution is
successful and SMS-STATUS_REPORTs:
+CMGL:
,,,,[],[],,<
dt>,[
+CMGL:
,,,,[],[],,<
dt>,[...]]
In PDU mode (+CMGF=0):
+CMGL:
,,[],
u>[
+CMGL:
,,[],
[…]]
Or
+CMS ERROR:
Test +CMGL=?
+MMGL=?
+CMGL: (list of supported s)
+MMGL: (list of supported s)
The Test
command
lists all the
supported