PIONEERPOS AT Commands G24-LC - Manual (Page 92)

Call Control
3-28 G24-L AT Commands Reference Manual April 15, 2008
The following table shows the +CCFC parameters.
Note: A forward-to phone (and the optional fields , and )
are tied to a and a . This means that there can be a different
for the same because of a different . When registering without
mentioning a , =7 is selected.
A field is mandatory when registering (=3) and it is irrelevant
(ignored) in all other s.
Table 3-12: +CCFC Parameters
Description
0 - Unconditional
1 - Mobile busy
2 - No reply
3 - Not reachable
4 - All call forwarding
5 - All conditional call forwarding
0 - Disable
1 - Enable
2 - Query status
3 - Registration
4 - Erasure
<"number"> Calling line number. The number format is specified by .
Type of address octet in integer format-.
145
Default when dialing string includes international access code character "+".
129 Default when making a local call.
NULL, field not used (String type subaddress of format specified by ).
Field not used. Value is always 128 (unknown) - type of sub address octet in integer
format.
The sum of integers each representing a class of information.
1 - Voice
2 - Data - refers to all bearer services.
4 - Fax
The default value is 7.
1-30 - The number of seconds to wait before calls are forwarded, when "no reply" is
enabled or queried. The default value is 20.
Note: The parameter must be a multiple of 5, for example, 5, 10, 15 and so on. If not,
the modulo of 5 will be ignored.
0 - Not active
1 - Active