PIONEERPOS AT Commands G24-LC - Manual (Page 188)

Network
3-124 G24-L AT Commands Reference Manual April 15, 2008
The following table shows the +COPS parameters.
Table 3-78: +COPS Parameters
Description
The operator format type:
0 Long
alphanumeric
1 Short alphanumeric
2 Numeric
The default value is 0.
Determines whether what is displayed is defined by , or is done automatically
by the G24-L.
0
Automatic ( field is ignored)
1 Manual ( field is present)
2 De-register from network
3 Set only ( field is ignored); used for Read command only, do
not attempt registration/deregistration
4
Manual/automatic ( field is present; if manual selection fails, use
automatic mode)
The default value is 0.
0 Unknown
1 Available
2 Current
3 Forbidden
Operator name displayed.
The long alphanumeric format can be up to 16 characters long. The short
alphanumeric format can be up to 8 characters long.
The numeric format is the GSM Location Area Identification number (refer to GSM
04.08 [8] subclause 10.5.1.3), consisting of a three BCD digit country code (as per
ITU-T E.212 Annex A [10]), plus a two BCD digit network code, which is
administration specific.
The returned is not in BCD format, but in IRA characters converted from
BCD, and therefore the number has the following structure:
(country code digit 3)(country code digit 2)(country code digit 1)(network code digit
2)(network code digit 1)