PIONEERPOS AT Commands G24-LC - Manual (Page 325)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-261
Command Type Syntax Response/Action Remarks
Set AT+MTKP=
Type>,
[,]
OK
or:
+CME ERROR:
The Set command allows
the user to answer the
following proactive
commands:
• GET_INKEY Key
pressed from the user.
• GET_INPUT Message
entered by the user.
• Enable/disable the
DTMF service by the
user.
• Launch browser.
• Set up event kist.