PIONEERPOS AT Commands G24-LC - Manual (Page 149)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-85
If the command is executed but no acknowledgment is expected, or some other G24-L related
error occurs, the final result code +CMS ERROR: is returned.
Example
AT+CNMI=3,2
OK
AT+CMSS=142,"054565132" // send to myself
+CMSS: 74
OK
+CMT: "+97254565132",,"03/04/09,17:14:33+08"
new message text
AT+CNMA
OK
AT+CNMI?
+CNMI: 3,2,0,0
OK
AT+CNMI=0,0,0,1
OK
AT+CSMP=49
OK
AT+CSMP?
+CSMP: 49,167,0,0
OK
AT+CNMI?
+CNMI: 0,0,0,1,0
OK
AT+CMSS=295
+CMSS: 184
OK
+CDS: 6,184,"+972524680592",145,"05/08/02,17:19:23+08","05/08/02,17:19:24+08",0
AT+CNMA
OK
AT+CNMI?
+CNMI: 0,0,0,1,0
OK
Command Type Syntax Response/Action Remarks
Set AT+CNMA OK
or:
+CMS ERROR:
Read The Read command for +CNMA is not
defined by ETSI, and therefore is not
supported by the G24-L. The G24-L
returns an error.
Test The Test command for +CNMA is not
defined by ETSI, and therefore is not
supported by the G24-L. The G24-L
returns an error.