PIONEERPOS AT Commands G24-LC - Manual (Page 147)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-83
The following table shows the +CNMI parameters.
Example
AT+CNMI=?
+CNMI: (0,3),(0-2),(0,2),(0-2),(0)
OK
AT+CNMI?
+CNMI: 0,0,0,0
OK
AT+CNMI=3,1
OK
AT+CMSS=142,"0544565034" // send to myself
+CMSS: 72
OK
+CMTI: "SM",15
AT+CNMI=,2
OK
AT+CSDH=1
OK
AT+CMSS=142,"054565034" // send to myself
+CMSS: 73
OK
Read +CNMI? +CNMI:,,,,
Test +CNMI=? +CNMI: (list of supported s), (list of supported s),
(list of supported s), (list of supported s), (list of
supported s)
Table 3-49: +CNMI Parameters
Description
0 Buffer unsolicited result codes (default).
3 Forward unsolicited result codes directly to the terminal
0 No SMS-DELIVER indications are routed to the terminal (default)
1 If SMS-DELIVER is stored in the G24-L, the memory location indication is
routed to the terminal using the unsolicited result code: +CMTI:
,
2 SMS-DELIVER is routed directly to the terminal
Reserved for future implementation.
0 No SMS-STATUS-REPORT indications are routed to the terminal (default)
1 SMS-STATUS-REPORT is routed directly to the terminal
2 If SMS-STATUS-REPORT is stored in the G24-L, the memory location
indication is routed to the terminal using the unsolicited result code: +CDSI:
,
0 No SMS-STATUS reports are buffered.
Command Type Syntax Response/Action