PIONEERPOS AT Commands G24-LC - Manual (Page 249)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-185
The following table shows the +CLCK parameters.
Command
Type Syntax Response/Action Remarks
Set +CLCK=,
[,
[,]]
For where
is irrelevant
(SC, FD):
+CLCK=,2
+CLCK:
For with several
supported es:
+CLCK=,2
+CLCK:
,
[+CLCK:
,
[…]]
OK
The Set command performs the
specified action on the
specified .
Read +CLCK? +CLCK: ERROR
Test +CLCK=? +CLCK: (list of
supported s) The Test command returns the list of
supported facilities.
Table 3-124: +CLCK Parameters
Description
SC SIM Card PIN setting
0 Disable PIN
1 Enable PIN)
FD SIM Fixed Dialing memory setting
0 Disable fixed dialing feature
1 Enable fixed dialing feature)
AO BAOC (Bar All Outgoing Calls)
OI BOIC (Bar Outgoing International Calls)
OX BOIC-exHC (Bar Outgoing International Calls except to Home Country)
AI BAIC (Bar All Incoming Calls)
IR BIC-Roam (Bar Incoming Calls when Roaming outside the home country)
AB All Barring services (applicable only for =0)
AG All outgoing barring services (applicable only for =0)
AC All incoming barring services (applicable only for =0)
String type, 4-8 character password
0 Unlock
1 Lock
2 Query status ( does not apply)