PIONEERPOS AT Commands G24-LC - Manual (Page 182)

Network
3-118 G24-L AT Commands Reference Manual April 15, 2008
+CRLP, Radio Link Protocol
This command displays the Radio Link Protocol parameters that are used when non-transparent
data calls are originated.
The following table shows the +CRLP parameters.
Example
AT+CRLP=?
+CRLP: (010-061),(010-061),(048-255),(006-015)
OK
AT+CRLP?
+CRLP: 061,061,048,006
OK
Command
Type Syntax Response/Action Remarks
Set +CRLP=
[[,[,
[,]]]]
OK
or:
+CME ERROR:
The Set command enables
you to change the RLP
parameters.
Read +CRLP? +CRLP= ,,,
OK
or:
+CME ERROR:
Test +CRLP=? +CRLP= (list of supported s),
(list of supported s), (list of
supported s), (list of supported
s)
OK
or:
+CME ERROR:
Table 3-75: +CRLP Parameters
Description
IWF to MS window size.
The default value is 61.
MS to IWF window size.
The default value is 61.
Acknowledgement timer T1.
The default value is 48.
Retransmission attempts N2 in integer format (refer to GSM 04.22 [18] subclause
5.4.3)
The default value is 15.