PIONEERPOS AT Commands G24-LC User Manual
Page 53
Chapter 1: Product Features
April 15, 2008
G24-L AT Commands Reference Manual
1-23
&Y
This command displays the default user profile.
+CMER
This command enables an external accessory to receive key press
information from the G24-L’s internal keypad.
+CLAN
This command handles the selection of language in the ME.
+CIND
This command is used to query the status of various ME indicators.
Unsolicited UI Status Messages
+CIEV
An unsolicited indication regarding various phone indications that is
sent to the DTE when the
is set to 1.
GPRS
GPRS Commands
+CGCLASS
This command sets the GPRS mobile station class.
+CGDCONT
This command specifies the PDP (Packet Data Protocol) context.
+CGQMIN
This command sets the minimum acceptable quality of service
profile.
+CGQREQ
This command displays the requested quality of service profile.
+CGATT
This command attaches the G24-L to the GPRS network.
+CGPADDR
This command reads the allocated PDP addresses for the specified
context identifiers.
+MGEER
This command returns the PDP context activation reject cause.
D*99
This command enables the ME to perform the actions necessary for
establishing communication between the terminal and the external
PDN.
+CGPRS
This command indicates whether there is GPRS coverage.
+CGACT
This command activates/deactivates the PDP Context.
STK Commands
+MTKR
This command displays the profile that is downloaded from the
G24-L to the SIM during the SIM initialization process.
+MTKE
This command enables/disables the SIM ToolKit functionalities.
+MTKP
This is both a command and an unsolicited event. The command
responds to an unsolicited event.
+MTKM
This is both a command and an unsolicited event. The command
selects items from the menu.
+MTKC
This unsolicited event notifies the terminal when supplementary
services, SMS Control or Call Control are modified.
+MTKA
This command sends acknowledge response from the user (TE) to
the STK.
Table 1-1: AT Commands (Cont.)
AT Command
Description
Page