PIONEERPOS AT Commands G24-LC - Manual (Page 404)

AT Commands Alphabetical Summary
A-2 G24-L AT Commands Reference Manual April 15, 2008
&G This command is supported for
backward compatibility only, and
has no effect. Page 3-304
&J This command is supported for
backward compatibility only, and
has no effect. Page 3-304
&K This command configures the
RTS/CTS flow control. Page 3-135
&L This command is supported for
backward compatibility only, and
has no effect. Page 3-304
&M This command is supported for
backward compatibility only, and
has no effect. Page 3-304
&P This command is supported for
backward compatibility only, and
has no effect. Page 3-304
&Q This command selects the
asynchronous mode, and has no
effect. Page 3-33
&R This command is supported for
backward compatibility only, and
has no effect. Page 3-304
&S This command is supported for
backward compatibility only, and
has no effect. Page 3-304
&T This command is supported for
backward compatibility only, and
has no effect. Page 3-304
&V This command displays the
current active configuration and
stored user profiles. Page 3-221
&W This command stores the user
profile. Page 3-222
&Y This command displays the
default user profile. Page 3-224
? This command displays the most
recently updated value stored in
the S-register. Page 3-198
\A This command is supported for
backward compatibility only, and
has no effect. Page 3-304
\B This command is supported for
backward compatibility only, and
has no effect. Page 3-304
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page