PIONEERPOS AT Commands G24-LC - Manual (Page 299)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-235
The following table shows the +CGQMIN parameters.
Read AT+CGQMIN? +CGQMIN: , ,
,
,,
[+CGQMIN:
, ,,
, , [...]]
OK
or:
+CME ERROR:
The Read command
returns the current
settings for each defined
context.
Test AT+CGQMIN=? +CGQMIN: , (list of
supported s), (list of
supported s), (list of
supported s), (list of
supported s), (list of
supported s)
[+CGQMIN:
, (list of supported
s), (list of supported
s), (list of supported
s), (list of supported
s), (list of supported
s)
OK
or:
+CME ERROR:
The Test command
returns the parameter
value ranges for each
Table 3-154: +CGQMIN Parameters
Description
A numeric parameter that specifies a particular PDP context definition. The value is
from 1 to 3.
A numeric parameter that specifies the precedence class.
A numeric parameter that specifies the delay class.
A numeric parameter that specifies the reliability class.
A numeric parameter that specifies the peak throughput class.
A numeric parameter that specifies the mean throughput class.
Command
Type Syntax Response/Action Remarks