PIONEERPOS AT Commands G24-LC - Manual (Page 282)

UI (User Interface)
3-218 G24-L AT Commands Reference Manual April 15, 2008
,,
Integer type. Parameters passed on by the ME to the SIM. These parameters are man-
datory for every command, except GET RESPONSE and STATUS.
READ BINARY
Offset high (0...255)
Offset low (0...255)
Length (0...255)
READ BINARY
Rec. No. (0...255)
Mode "02" = next record
"03" = previous record
"04" = absolute mode/current mode, the record
number is given in P1 with P1='00' denoting
the current record.
Length (0...255)
GET RESPONSE
"00"
"00"
Length (0...255)
UPDATE BINARY
Offset high (0...255)
Offset low (0...255)
Length (0...255)
UPDATE RECORD
Rec. No. (0...255)
Mode "02" = next record
"03" = previous record
"04" = absolute mode/current mode, the record
number is given in P1 with P1='00' denoting
the current record.
Length (0...255)
STATUS
"00"
"00"
Length (0...255)
Information which shall be written to the SIM (hexadecimal character format). Man-
datory for UPDATE BINARY and UPDATE RECORD.
Table 3-144: +CRSM Parameters (Cont.)
Description