PIONEERPOS AT Commands G24-LC - Manual (Page 308)

GPRS
3-244 G24-L AT Commands Reference Manual April 15, 2008
+CGPRS, GPRS Coverage
This command indicates whether there is GPRS coverage.
Note: GPRS coverage will be detected only when SIM has GPRS ability.
The following table shows the +CGPRS parameters.
Example
Without GPRS coverage
AT+CGPRS
+CGPRS: 0
OK
AT+CGPRS?
+CGPRS: 0
OK
With GPRS coverage
AT+CGPRS
+CGPRS: 1
OK
Command Type Syntax Response/Action Remarks
Execute AT+CGPRS +CGPRS:
OK
or:
+CME ERROR:
The Execute command returns the
mode of the GPRS coverage.
Read AT+CGPRS? +CGPRS:
OK
or:
+CME ERROR:
The Read command returns the mode
of the GPRS coverage
Table 3-160: +CGPRS Parameters
Description
0 No GPRS coverage
1 GPRS coverage
There is no parameter default value