Mipxon, flow control - xon, Mipconf - configure internal tcp/ip stack – PIONEERPOS AT Commands G24-LC User Manual
Page 353
Chapter 3: AT Commands Reference
April 15, 2008
G24-L AT Commands Reference Manual
3-289
Event
+MIPXOFF:
Example
+MIPXOFF:
//The G24-L detects that the accumulating buffer 1 has reached its
Xoff watermark.
From this point, the terminal is not allowed to send data, until it receives the +MIPXON
command.
MIPXON, Flow Control - Xon
This command is the unsolicited event that the G24-L sends to the terminal when it detects that it
has free memory in the accumulating buffer and can process new +MIPSEND requests, after the
+MIPXOFF event.
Event
+MIPXON:
Example
+MIPXON: 1
//The G24-L pushed the data into the protocol stack on socket 1
and is able to handle more data from the terminal.
MIPCONF - Configure Internal TCP/IP stack
This command allows to configure TCP stack parameters, such as retransmissions number, upper
and bottom limits of retransmission timeout, close delay. It can be used to configure TCP socket