PIONEERPOS AT Commands G24-LC - Manual (Page 350)

GPRS
3-286 G24-L AT Commands Reference Manual April 15, 2008
The following table shows the +MIPPUSH parameters.
Example
AT+MIPPUSH=1 //Terminal asks the G24-L to flush the buffer in socket 1 (was opened
using the +MIPOPEN command)
+MIPPUSH: 0
OK
+MIPFLUSH, Flush Data from Buffers
This command causes the G24-L to flush (delete) data accumulated in its accumulating buffers.
The following table shows the +MIPFLUSH parameters.
Table 3-201: +MIPPUSH Parameters
Description
Socket ID 1,2,3,4Number of valid socket
Destination IP IP of destination site in the format AAA.BBB.CCC.DDD. The value can be written in
1, 2 or 3 digits.
Destination
Port 0-65535Port of destination site. Written in decimal digits.
Command Type Syntax Response/Action
Set +MIPFLUSH = ERROR
or:
+MIPFLUSH:
OK
Read +MIPFLUSH? +MIPFLUSH:[]
Test +MIPFLUSH=? +MIPFLUSH=()
Table 3-202: +MIPFLUSH Parameters
Description
Socket ID 1,2,3,4 - Number of valid sockets