PIONEERPOS AT Commands G24-LC - Manual (Page 296)

GPRS
3-232 G24-L AT Commands Reference Manual April 15, 2008
+CGDCONT, Define PDP Context
This command specifies the PDP (Packet Data Protocol) context.
Command
Type Syntax Response/Action Remarks
Set AT+CGDCONT=[
[,[,
[,[,p> [,]]]]]]
OK
or:
+CME ERROR:
The Set command specifies the context
identification parameter values for a
PDP context. A special form of the Set
command, +CGDCONT=
causes the values for context number
to become undefined.
Read AT+CGDCONT? +CGDCONT: ,
, ,
,
,
[<
LF>+CGDCONT:
, ,
, ,
,
The Read command returns the current
settings for each defined context.
Test AT+CGDCONT=? +CGDCONT: (range of
supported s),
, , , (list of
supported s),
(list of supported
s) The Test command returns the values
supported as a compound value. If the
ME supports several PDP types,
, the parameter value
ranges for each are
returned on a separate line.