PIONEERPOS AT Commands G24-LC - Manual (Page 291)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-227
AT+CLAN="DE"
OK
AT+CLAN?
+CLAN: "DE"
OK
+CIND, Indicator Control
This command is used to query the status of various ME indicators.
The following table shows the +CIND parameters.
Command
Type Syntax Response/Action Remarks
Read AT+CIND? +CIND:,…. Read command returns the
status of ME indicators.
Test AT+CIND=? +CIND :(,(list of supported
s)) ,(,(list of
supporteds))…
Test command returns pairs,
where string value is
a short description of the indi-
cator and compound value is
the allowed values for the
indicator.
Table 3-150: +CIND Parameters
Description
0 Service not available.
1 Service available.
0 No call in progress.
1 Call in progress.
0 No unread messages.
1 Unread messages exist.
0 ME is camped on a home network.
1 ME is roaming on home network.
2 ME is roaming on other network.
0 ME has no service.
1 ME has 1 bar of signal strength.
2 ME has 2 bars of signal strength.
3 ME has 3 bars of signal strength.
4 ME has 4 bars of signal strength.
5 ME has 5 bars of signal strength.
0 No SIM card available.
1 SIM card is inserted.
0 SMS storage is not full.
1 SMS storage is full.