PIONEERPOS AT Commands G24-LC - Manual (Page 258)

Modem Configuration and Profile
3-194 G24-L AT Commands Reference Manual April 15, 2008
S, Bit Map Registers
This command reads/writes values of the S-registers. The G24-L supports this command for
various S values, according to official specifications (ITU-I, ETSI, or manufacturer specific).
Command Type Syntax Response/Action Remarks
Set ATSn= OK
or:
+CME ERROR:
The Set command is allowed for
read/write S-registers, and not allowed
for read-only S-registers.
Read ATSn?
S-register n>
or:
+CME ERROR:
Test The Test command for Sn is not
defined by ITU, and therefore is not
supported by the G24-L. The G24-L
returns an error.