PIONEERPOS AT Commands G24-LC - Manual (Page 237)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-173
+CRTT, Ring Type Selection
This command plays one cycle of a ring tone, stops the cycle in the middle and sets the ring tone
to be used.
The following table shows the +CRTT parameters.
Command
Type Syntax Response/Action Remarks
Set AT+CRTT=
,
OK
or:
+CME ERROR:
The Set command sets the ring type
and operation.
Read AT+CRTT? +CRTT:
OK
or:
+CME ERROR:
The Read command returns the ring
type number.
Test AT+CRTT=? +CRTT: (list of
supported
s),
(list of supported
s)
OK
or:
+CME ERROR:
The Test command returns the list of
supported tone type numbers and
operations.
Table 3-115: +CRTT Parameters
Description
Number> Ring tone styles ( see Table 3-116 )
Play or set a tone
0
Play (play one cycle)
1 Set
2 Stop