PIONEERPOS AT Commands G24-LC - Manual (Page 189)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-125
+CPOL, Preferred Operators
This command is used to edit the list of preferred network operators located in the SIM card.
Command
Type Syntax Response/Action Remarks
Set AT+CPOL=[]
[,[,
]]
OK
or:
+CME ERROR:
The Set command writes an entry in
the list of preferred operators.
Note: The G24-L may also update
this list automatically when
new networks are selected.
Read AT+CPOL? +CPOL:
,,
[+CPOL:
,,
[...]]
OK
or:
+CME ERROR:
The Read command displays all the
preferred operators that have been
entered into the list.
Test AT+CPOL=? +CPOL: (list of supported
s),(list of supported
s)
OK
or:
+CME ERROR:
* Index range is SIM
dependent
The Test command displays the
entire index range supported by the
SIM.