PIONEERPOS AT Commands G24-LC - Manual (Page 165)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-101
+MMAR, Motorola Mark As Read
This command handles changing the attribute of an SM in the G24-L memory location
, preferred message storage , from "REC UNREAD" to "REC READ".
( is selected using the +CPMS command.) If the status change fails, +CMS ERROR:
is returned.
The following table shows the +MMAR parameters.
Example
AT+MMGR=1
+MMGR: "REC UNREAD","+972544565034",,"04/11/04,09:48:36+08"
message text
OK
AT+MMAR=1
OK
AT+MMGR=1
+MMGR: "REC READ","+972544565034",,"04/11/04,09:48:36+08"
message text
OK
+CMSS, Send Message From Storage
This command sends a pre-stored message, written previously using the +CMGW command. The
, parameters are optional. If a DA is given, the message is sent to that address.
Command
Type
Syntax Response/Action Remarks
Set +MMAR= OK
or:
+CMS ERROR:
Read The Read command for +MMAR is
not defined, and therefore is not
supported by the G24-L. The G24-L
returns an error.
Test The Test command for +MMAR is not
defined, and therefore is not supported
by the G24-L. The G24-L returns an
error.
Table 3-61: +MMAR Parameters
Description
Index of the message to be marked as read, in
the SMS memory.