PIONEERPOS AT Commands G24-LC - Manual (Page 158)

SMS
3-94 G24-L AT Commands Reference Manual April 15, 2008
+CMGR, +MMGR, Read Message
These commands handle the reading of SMs. The command displays the message in location
of the preferred message storage (selected using the +CPMS command). If the
status of the message is "RECEIVED UNREAD", the +CMGR command changes the status to
"RECEIVED READ". The +MMGR command does not change the message status.
Command
Type
Syntax Response/Action Remarks
Set +CMGR=
or
+MMGR=
>
If text mode (+CMGF=1) command execution is
successful and SMS-DELIVER:
+CMGR:
,,[],
[,,,,,,,h>]
If text mode (+CMGF=1) command execution is
successful and SMS-SUBMIT:
+CMGR:
,,[]
[,,,,,[],,
,]
If text mode (+CMGF=1) command execution is
successful and SMS-COMMAND:
+CMGR:
,,
[,,[],[],[],<
LF>]
If text mode (+CMGF=1) command execution is
successful and CBM storage:
+CMGR:
,,,,,
If text mode (+CMGF=1) command execution is
successful and SMS-STATUS-REPORT:
+CMGR:
,,,[],[],,
t>
If PDU mode (+CMGF=0) and command
execution is successful:
+CMGR:
,[],
otherwise:
+CMS ERROR:
The Set command
reads the SM
located at
in the
G24-L message
storage and
displays it.