PIONEERPOS AT Commands G24-LC - Manual (Page 139)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-75
SMS
SMS Commands
G24-L supports SMS PDU and SMS TEXT mode according to ETSI specifications 07.05 & 3.40.
Cell Broadcast message is not supported yet by the G24-L.
+CSMS, Select Message Service.
This command handles the selection of the messaging service. It returns the types of messages
that are supported by the G24-L.
The following table shows the +CSMS parameters.
Note: Only the 128 (manufacturer-specific) messaging service is supported by the G24-L. The
service is supported for all messaging types (mobile terminated, mobile originated and
broadcast).
Command
Type
Syntax Response/Action Remarks
Set +CSMS= +CSMS:
,,
or:
+CMS ERROR:
The Set command sets the type of
service and returns the types of
messages supported by the G24-L.
Read +CSMS? +CSMS:
,,,
The Read command returns the
supported message types along with
the current service setting.
Test +CSMS=? +CSMS: The Test command returns a list of all
the services supported by the terminal.
Table 3-41: +CSMS Parameters
Description
Integer that defines the type of service
1-127 Not supported
128
Supported (manufacturer-specific)
Mobile terminated messages
0
Not supported by the G24-L
1 Supported by the G24-L
Mobile originated messages
0
Not supported by the G24-L
1 Supported by the G24-L
Reserved for future implementation.