PIONEERPOS AT Commands G24-LC - Manual (Page 105)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-41
The following table shows the +CLCC parameters.
Note: When a mobile-originated call is routed to PSTN (PABX), no ALERT indication is
prompted.
Example
AT+CLCC=?
+CLCC: (0,1)
OK
AT+CLCC
+CLCC: 1,0,0,0,0,"01256316830",129,"Shmuel"
OK
AT+CLCC?
Table 3-19: +CLCC Parameters
Description
0 Disable CLCC unsolicited indication
1 Enable CLCC unsolicited indication
The default value is 0.
Integer type, call identification number
0 Mobile originated call (MO)
1 Mobile terminated call (MT)
The state of the call
0
Active
1 Held
2 Dialing (MO call)
3 Alerting (MO call)
4 Incoming (MT call)
5 Waiting (MT call)
6 Released
Bearer/Teleservice
0
Voice Call
1 Data
2 Fax
Multiparty status
0
Call is not part of a multiparty call
1 Call is one of multiparty call parties
Phone number in the format specified by .
Contains a string of up to 32 characters.
Phone number display format.
Type of address octet in integer format (refer to GSM 04.08 [8] subclause 10.5.4.7)
129
Local number
145 International number with access character +
Text representation of the phone book entry.
String type alphanumeric representation of corresponding to the entry
found in the phone book.
Contains a string of up to 20 characters.